123.hp.com/ojpro6968

HP Officejet Pro 6968 Setup

123 hp officejet pro 6968 setup
  • 123 HP Officejet Pro 6968 Printer Driver Download
  • HP Ojpro6968 Airprint Setup
  • HP Officejet Pro 6968 Printer Troubleshooting
  • HP Officejet Pro 6968 Software Download
  • HP Officejet Pro 6968 Wireless All In One Inkjet Printer
  • HP Officejet Pro 6968 Drivers Windows 10
  • 123.hp.com/ojpro6968 Wireless Setup
  • HP Officejet Pro 6968 Printer Driver Download
  • 123.hp.com/ojPro6968 ePrinter
  • 123.hp.com/setup Oj6968
  • 123.hp.com/ojpro6968
  • 123 HP Officejet Pro 6968 User Manual
  • Unboxing HP Officejet Pro 6968 Printer
  • Install HP Officejet Pro 6968 Printer

123hp.com/OjPro6968- PRINTER SETUP OFFICEJETPRO 6968

First time 123 hp printer setup

  • Take off the tapes on the 123 hp printer and then clear out the packing materials within the 123 hp printer.
  • Plug in the power cord and turn the 123 hp printer on.
  • Set your preferences on the 123 hp printer control panel.
  • Pull up the cartridge access door to install the cartridges in its slots.
  • Pull up the output tray and draw out the input tray to insert a stack of paper.
  • Slide the input tray back into its place and wait for the alignment page to print.

Software and Driver installation

  • Type in the name of your 123 hp printer in the search box of the 123 HP Support 123.hp.ojpro6968 website.
  • Click on the Software and drivers tab.
  • Click Go to proceed.
  • The website displays the software and drivers once you pick your operating system and your version.
  • Download and run the file to install it.

123 hp printer not found during network driver setup (Windows)

To resolve this issue and set up your 123.hp.com officejetpro 6968 printer on a wireless network, do as follows:

  • Unplug the power cord from the router and turn off the 123 hp printer and your computer. After awhile plug in the power cord back into router and turn on both your 123.hp.com officejetpro 6968 printer and computer. Check if the issue has been the resolved.
  • Confirm that the 2.4 GHz router band has been enabled and that your 123.hp.com officejetpro 6968 printer is connected to it and not to any VPN, guest or host network. Also confirm that the wireless signal is turned on, that the wireless icon light is either steady or blinking and Airplane Mode is turned off. Check if the issue has been the resolved.
  • Either try connecting the 123 hp printer manually to your network using the Wireless Setup Wizard or use the Wi-Fi Protected Setup to connect your 123.hp.com officejetpro 6968 printer to the network.
  • Run the 123 HP Print and Scan Doctor and go to Troubleshooting Firewalls under Check if disabling any of the firewall software resolves the issue.
  • Uninstall your 123.hp.com officejetpro 6968 printer software and download the latest version of it from online. Begin the installation and check if the issue has been resolved.

123 hp printer not found during network driver setup (Mac)

To resolve this issue and set up your 123.hp.com officejetpro 6968 printer on a wireless network, do as follows:

  • Unplug the power cord from the router and turn off the 123 hp printer and your computer. After awhile plug in the power cord back into router and turn on both your 123.hp.com officejetpro 6968 printer and computer. Check if the issue has been the resolved.
  • Confirm that the 2.4 GHz router band has been enabled and that your 123.hp.com officejetpro 6968 printer is connected to it and not to any VPN, guest or host network. Also confirm that the wireless signal is turned on, that the wireless icon light is either steady or blinking and Airplane Mode is turned off. Check if the issue has been the resolved.
  • Either try connecting the 123 hp printer manually to your network using the Wireless Setup Wizard or use the Wi-Fi Protected Setup to connect your 123.hp.com officejetpro 6968 printer to the network.
  • On your Mac, go to 123 hp printers & Scanners, and select Reset printing system. (Resetting deletes all the 123 hp printers in the queue). Check if the issue has been the resolved.
  • Drag the 123 HP folder to Trash and then Empty Trash. Download the latest version of it from online and begin the installation to check if the issue has been resolved.

Printer is Offline (Mac)

Disrupted communication with your 123.hp.com officejetpro 6968 printer can result in either of these messages: ‘Offline’ or ‘123 hp printer not responding’, displaying on screen while attempting to print. This issue can be resolved as follows:

STEP 1

  • If communication to your computer has been established via an USB cable connection, disconnect the cable. Reconnect it after a while and then attempt printing.
  • If communication to your computer has been established via a network connection, Disconnect the power cord from your router. Reconnect it back after a while and then restart your Mac. Click the apple icon and go to System Preferences. Open 123 hp printers and Scanners/ Print & Fax / Print & Scan and click on the name of your 123.hp.com officejetpro 6968 printer. If you do not find the name of your 123.hp.com officejetpro 6968 printer, reconnect your 123.hp.com officejetpro 6968 printer to the network and then click Open Print Queue to try printing.

 

STEP 2

Turn on the 123 hp printer and disconnect the power cord. Plug the power cord back in, turn on your 123.hp.com officejetpro 6968 printer again and then attempt printing.

STEP 3

If you find that there are multiple 123 hp printer queues for your 123.hp.com officejetpro 6968 printer in the 123 hp printers and Scanners list, remove all except for the one that displays an ‘idle’ status   and then attempt printing.

STEP 4

Delete your 123.hp.com/ojpro6968 printer from the 123 hp printer’s list. Attempt printing after adding it back again.

 

STEP 5

Note: Resetting deletes all devices in the print queue.

Reset Printing System by right-clicking in the 123 hp printer’s list and clicking on the option. Add your 123.hp.com officejetpro 6968 printer back to the list and then attempt printing.

STEP 6

Attempt printing after disconnecting from any guest or host network and reconnecting back to your own network.

STEP 7

Try connecting to your 123.hp.com officejetpro 6968 printer from another Mac and attempt printing to make sure that the problem doesn’t rest with your computer.

STEP 8

Confirm that your wireless router supports multicasting.

STEP 9

Either turn off the IPv6 setting in the Advanced network settings menu on your 123.hp.com officejetpro 6968 printer control panel, or search your 123.hp.com officejetpro 6968 printer IP address on your internet browser and select Enable IPv4 only in the Network or Networking tab.

STEP 10

Select 123 HP Jet direct- Socket after entering your 123.hp.com/ojpro6968 printer’s IP address under the IP tab of the 123 hp printers and Scanners list. Add your 123.hp.com/ojpro6968 printer back to the list and attempt printing.

Print Jobs Stuck in Print Queue (Mac)

When your print jobs get stuck in the print queue try the below listed possible solutions:

  • If your connection type is USB 123 hp printer connection, then disconnect the USB cable. Reconnect it back after a while and attempt printing.
  • If your connection type is wireless, turn off the router and the 123 hp printer. Turn them on again and attempt printing.
  • If under 123 hp printers and Scanners, there are multiple 123 hp printer queues, delete all except for the one belonging to your 123 hp printer and attempt printing.
  • Remove your 123 hp printer from the list and then attempt printing after adding it back to the Print Using
  • Disconnect the power cord from the 123 hp printer. Reconnect it back after a while and attempt printing.
  • If the aforementioned solutions do not resolve the issue, reset the printing system.

Printer is offline (Windows)

Disrupted communication with your 123.hp.com officejetpro 6968 printer can result in the message: ‘Offline’ displaying on screen while attempting to print. This issue can be resolved as follows:

STEP 1

Run 123 HP Print and Scan Doctor and select Test Print to troubleshoot this problem.

STEP 2

Right click your 123.hp.com officejetpro 6968 printer icon under Devices and 123 hp printers and select Set as Default 123 hp printer. Right click the 123 hp printer icon again and select See What’s Printing to open the print queue. Uncheck Pause Printing and Use 123 hp printer Offline and then attempt printing again.

STEP 3

Turn on the 123 hp printer and disconnect the power cord. Plug the power cord back in, turn on your 123.hp.com officejetpro 6968 printer again and then attempt printing after conforming that the connection established between your 123.hp.com officejetpro 6968 printer and computer is working correctly.

STEP 4

Go to Devices and 123 hp printers and open the 123 hp printer Properties for your 123.hp.com officejetpro 6968 printer. Select the correct port type in the Ports tab and then attempt printing.

STEP 5

Attempt printing after updating your 123.hp.com officejetpro 6968 printer firmware.

STEP 6

Reconnect your 123.hp.com officejetpro 6968 printer to the network and click Manual IP in the Network or Networking tab. Either enter your 123.hp.com officejetpro 6968 printer IP address or click Suggest a manual IP address button to automatically fill it out for you and then click Apply. Go to Devices and 123 hp printers and open the 123 hp printer Properties for your 123.hp.com officejetpro 6968 printer. Add a new Standard TCP/IP Port in the Ports tab. Attempt printing using this new port.

 

STEP 7

  • Remove all the devices listed for your 123.hp.com officejetpro 6968 printer under Devices and 123 hp printers.
  • Open the 123 hp printer Assistant and follow the prompts to add a new 123 hp printer to Devices and 123 hp printers. In 123 hp printer Properties, select the standard port you created and attempt printing.

STEP 8

Attempt printing after disconnecting from any guest or host network and reconnecting back to your own network.

STEP 9

Go to Utility to change the connection type to your 123.hp.com officejetpro 6968 printer and then attempt printing.

STEP 10

Remove your 123.hp.com officejetpro 6968 printer from Devices and 123 hp printers and then install a new driver for your 1123.hp.com/ojpro6968 printer.

STEP 11

Go to Devices and 123 hp printers and open the 123 hp printer Properties for your 123.hp.com officejetpro 6968 printer. Select the port being used, in the Ports tab, click Configure Port and then uncheck SNMP Status Enabled. Re-enable SNMP if the problem remains unresolved.

STEP 12

Either turn off the IPv6 setting in the Advanced network settings menu on your 123.hp.com/ojpro6968 printer control panel, or search your 123.hp.com/ojpro6968 printer IP address on your internet browser and select Enable IPv4 only in the Network or Networking tab.

STEP 13

Try connecting to your 123.hp.com officejetpro 6968 printer from another computer and attempt printing to make sure that the problem doesn’t rest with your computer.

STEP 14

Uninstall your 123 hp printer driver software. Attempt printing after restarting your computer, and reinstalling the 123 hp printer software.

Using 123.hp.com/ojpro6968 Print and Scan Doctor to help resolve printer issues (Windows)

Turn on your 123.hp.com/ojpro 6968 printer and connect it to your computer. Download and run 123.hp.com/123 HP Print and Scan Doctor. Once you select your 123.hp.com/ojpro6968 printer on its screen, it can be used to resolve 123 hp printer issues in the following ways:

  • Click Fix Printing and follow the prompts to resolve the issue if a red X is displayed.
  • Click Fix Scanning and follow the prompts to resolve the issue if a red X is displayed.
  • Resolve any firewall issues by clicking Network and then selecting Troubleshooting Firewalls.
  • The supply levels and cartridge information can be displayed by clicking 123 hp printer and selecting Supply Levels. To view 123 hp printer information, click 123 hp printer and then select Advanced 123 hp printer Data. To update the firmware click Update 123.hp.com/ojpro6968 hp printer Firmware.
  • To perform any 123 hp printer diagnostic and cleaning services, select 123 hp printer Services. To view 123 hp printer network connection information, select Show Advanced Info. And to view the 123 hp printer claim code, click Web Services and then select Print ePrint Instruction Page

Print Jobs Stuck in Print Queue (Windows)

When your print jobs get stuck in the print queue try the below listed possible solutions:

  • Open the Print Spooler and click Restart.
  • Disconnect the power cord from the 123 hp printer. Reconnect it back after a while and attempt printing.
  • If your connection type is USB 123 hp printer connection, then disconnect the USB cable. Reconnect it back after a while and attempt printing.
  • Attempt resolving the issue using 123 123 HP Print and Scan Doctor.
  • Attempt printing after unchecking both Pause Printing and Use 123 hp printer Offline in the print queue window.
  • Attempt printing after setting your 123.hp.com officejetpro 6968 printer as the default 123 hp printer under Devices and 123 hp printers.
  • Disable your system firewall and then attempt printing. If the problem remains unresolved, re-enable the firewall and proceed to the next step.
  • Go to Devices and 123 hp printers and remove your 123.hp.com officejetpro 6968 printer from the list. Re-install your 123.hp.com officejetpro 6968 printer software after you restart your computer and then attempt printing.
  • Try printing from another application to make sure that the problem doesn’t lie with the application you were earlier attempting to print from.
  • Try printing from another user account to make sure that the account you were earlier attempting to print from has the necessary permissions.
  • In the System File Checker, enter the command prompt: SFC/scannow to detect any issues with system files and perform repairs.

Fixing print quality issues

  • Work with genuine 123.hp.com/ojpro6968 123 HP ink cartridges, ColorLok papers and 123 123 HP Advanced Photo Paper for enhanced, consistent print quality.
  • To check ink levels on the 123 hp printer control panel, open the dashboard and touch the Ink Level Indicator Replace any cartridges low on ink.
  • Open the cartridge access door and remove the cartridges from their slots. Check to see if their vents are clogged. Use a pin to clear the adhesive from the clogged vents.
  • On the 123 hp printer control panel, open the dashboard and navigate to Go to Tools under 123 hp printer Maintenance and select Clean Printhead.

Replacing ink cartridges

  • Open the cartridge access door.
  • Hold down the cartridge that needs a replacement, to release it from its slot.
  • Install the new, unpacked ink cartridge into that slot.
  • Push till the cartridge snaps into place and then close the cartridge access door.
  • Take the alignment page and scan it.

HP Officejet Pro 6968 Wireless Setup

To setup your 123 hp printer on the wireless network to which your computer is connected, press the wireless icon. Go to Setup on your 123 hp printer control panel and open the Wireless Setup Wizard. Follow the prompts to complete the setup.

Related HP Officejet Pro Printer Models